Third Time’s A Charm (For Concrete Stain)

Well, I finally got out of my things-aren’t-working-out-the-way-I-planned funk about the concrete counters, which, if you remember had was preceded by a slight issue with stain.

It wasn’t pretty…

DSC_0547

Before taking a sledge hammer too it, I decided to give one more stain option a try. This time I went to Lowe’s and had Quickcrete stain tinted to “Gunpowder”. (Note to self: Do that first next time.)

And instead of a foam brush, MysteryMan used this…

DSC_0553

Which, was a good idea as far as concrete results. Bad for not getting stain all over the place, including probably in our lungs.

DSC_0549

Turned out pretty good, considering what it looked like before:

DSC_0550

Uh. It looks like the wall is going to need a little repainting.

DSC_0555

Other than that, finishing off the concrete meant a couple coats of a sealer. I was scared to use the foam brush again given the disastrous results the first time, so I tried using a roller. Turns out this time the foam brush worked better. Go figure.

DSC_0565

Here’s the tub surround…

DSC_0567

And the color looks great with tile. I’ll be using this for the backsplash as well as the fireplace and shower.

DSC_0572

And that, folks, is a happy concrete ending.

8 Responses

  1. I think the concrete was just screwing with you the whole time to insure it dressed up and looked right for the tile. It looks just perfect with the tile now. So, SEE it got its wish!

  2. Just a question, how smooth is the concrete? With the sealer on it, is it smooth enough to wipe down with little trouble. I have been thinking about trying a concrete counter in the kitchen area, but wasn’t sure how well it would work out.

    It does look really good and the tile is great with it. 🙂

  3. That looks great, Kit! All coming together…funks are good…let’s us ignore problem till solution arises…now you’re a genius! Looking forward to seeing the finished room!

  4. I like how this turned out, but I was just wondering if this was the look you were going for? I have seen it done on some DIY show where they were able to stain concrete to look just like granite, but it took (I think) 3 different coats and a layer of thick sealant. Compared to granite, which I think is more traditional, I like the more modern look you and Mystery Man created, but I was just wondering if that is what you wanted it to be. Keep it up, girl! 🙂

    1. That’s a good question. I was going for a more industrial look so I knew I wanted it to look like concrete instead of marble. This is darker than I originally pictured, but it still turned out pretty well!

Leave a Reply to Sarah @The Ugly Duckling House Cancel reply

Your email address will not be published. Required fields are marked *

I'm not interested in a mediocre life. I'm here to kick ass or die.

(formerly DIYdiva.net)